Plastiques &
élastomères

Plus d'info

Peintures, vernis, adhésifs, encres et revêtements

Plus d'info

Détergents et produits d’entretien

Plus d'info

Cosmétiques et produits d’Hygiène Corporelle

Plus d'info

Industrie Pharmaceutique

Plus d'info



Plastiques & elastomers

TECHNOLOGIES

LIENS UTILES

Visiter notre site web

Point focal REACH-CLIP

Nos Publications

Esp@cenet

WIPO-OMPI

INNORPI

L’agence de promotion de l’industrie et de l’innovation

Ministère de l’industrie

Filtrer par Mois: Année: [Voir tous]
Date Titre
02/01/2024

An analytical model to predict bond behavior of fiber reinforced polymer bonded to concrete with an end anchorage system

17/11/2023

Flexural behavior of RC continuous beams having hybrid reinforcement of steel and GFRP bars

17/11/2023

Preparation of polyurethane concrete and its novel application in bridge expansion joint anchorage zone

17/11/2023

Experimental and numerical investigation on the performance of GFRP-confined expansive concrete-filled unplasticized polyvinyl chloride tubes

17/11/2023

Techniques, applications, and prospects of recycled polyethylene terephthalate bottle: A review

17/11/2023

Monotonic and cyclic behaviour of deficient reinforced concrete slabs retrofitted with externally bonded carbon fibre reinforced polymer

17/11/2023

Composite cement embedded in a biopolymer matrix for bone tissue regeneration

23/02/2022

Materials, Vol. 15, Pages 1654: Study on Compression Deformation and Damage Characteristics of Pine Needle Fiber-Reinforced Concrete Using DIC

22/02/2022

Buildings, Vol. 12, Pages 255: Assessment of Strength Reduction Factor on Concrete Moment Frames According to the New Venezuelan Seismic Code

22/02/2022

Nanomaterials, Vol. 12, Pages 732: Influence of Different Nanometals Implemented in PMMA Bone Cement on Biological and Mechanical Properties

21/02/2022

Materials, Vol. 15, Pages 1595: Variation of Critical Water Pressure for Hydraulic Fracturing in Cement Mortar under Sulfate Attack

18/02/2022

Rubber and Rubber–Polymer Modifiers of Asphalt–Concrete Mixes Prepared by High-Temperature Shear-Induced Grinding. Part 3. Evaluation of Effectiveness of Modification

17/02/2022

Materials, Vol. 15, Pages 1499: Potential for Use of Recycled Cathode Ray Tube Glass in Making Concrete Blocks and Paving Flags

15/02/2022

Fractal Fract, Vol. 6, Pages 113: Pore Structural and Fractal Analysis of the Effects of MgO Reactivity and Dosage on Permeability and F–T Resistance of Concrete

15/02/2022

Materials, Vol. 15, Pages 1438: The Performance of Concrete Made with Secondary Products—Recycled Coarse Aggregates, Recycled Cement Mortar, and Fly Ash–Slag Mix

Enregistrements: 4081 - Nº Pages: 273